China/中文Other/EnglishEurope/English
SGM25701
Positive High-Voltage Hot Swap and Inrush Current Controller with Power-Limiting
Positive High-Voltage Hot Swap and Inrush Current Controller with Power-Limiting
GENERAL DESCRIPTION

The SGM25701 is a positive hot swap controller that allows a board to be safely inserted or removed from a live backplane. Inrush current control function can effectively reduce the voltage drop on the power supply rail.

The SGM25701 offers programmable power-limiting and current limit to ensure that the external MOSFET operates within its safe operating area (SOA) at all times.

The chip has a good output indication function when the VOUT increases to within the 1.4V range of the VIN.

Programmable under-voltage lockout or over-voltage lockout is used to turn off the device if the VIN drops below or raises over a threshold value. The fault detection time and initial insertion delay time can also be adjusted by the user.

The SGM25701B will latch off when a fault is detected, while the SGM25701A will go into auto-retry mode.

SGM25701 is available in a Green MSOP-10 package.

PIN CONFIGURATIONS

1677568596613934.png

FEATURES
  • Wide Input Voltage Range: 9V to 70V

  • Inrush Current Limit, PCB can be Safely Inserted into Live Equipment

  • External Device Programming Maximum Loss Limit

  • Programmable Current Limit

  • Adjustable Under-Voltage Lockout (EN/UVLO)

  • Adjustable Over-Voltage Lockout (OVLO)

  • Open-Drain for Good Output Indication

  • Quick Cut-Off Function when Severe Over-Current Occurs

  • Configure Charge Pump/Gate Driver for External N-MOSFET

  • The Setting of the Insertion Time Allowing the Ringing and Transient Recovery Process after the System Connected

  • Adjustable Fault Timing to Prevent False Shutdown

  • Behavior after Fault:

    SGM25701A: Auto-Retry

    SGM25701B: Latch-Off

  • Available in a Green MSOP-10 Package

APPLICATIONS

24V/48V Industrial Systems

Server Backplane Systems

Solid State Circuit Breaker

Base Station

ORDERING INFORMATION
Part Number Status Package Pins Pb-Free Temp Range
SGM25701AXMS10G/TR Production MSOP-10 10 Y -40℃ to +125℃ Samples
SGM25701BXMS10G/TR Production MSOP-10 10 Y -40℃ to +125℃ Samples
规格书暂未发布,请联系sales_china@sg-micro.com申请规格书。
* 请使用公司后缀邮箱申请。在邮件中写明您的公司邮箱、联系电话、公司名称、职位/头衔、您申请规格书的准确料号、芯片应用项目、芯片应用产品可以帮助您加快获取速度。