The Micro-Point-of-Load (μPOL) SGM61013 is a family of high-efficient and high-frequency Buck DC/DC converter. Operating with a switching frequency up to 10MHz, it allows the use of small external components in both value and footprint. Different versions are available with fixed output voltages of 1.2V, 1.8V and 3.3V, delivered from an input voltage supply of 2.3V to 5.5V. A low quiescent current of only 20μA (TYP) enables high efficiency even with very light loads.
At light current load condition, the converter will automatically enter pulse frequency modulation (PFM) mode for best possible efficiency over the entire range of load currents. If PFM mode is not desired, the MODE pin can be set high to forced pulse width modulation (FPWM) operation.
The SGM61013 is available in a Green WLCSP-0.9×1.2-6B package.
2.3V to 5.5V Input Voltage Range
SGM61013A: 1.8V Fixed Output Voltage
SGM61013B: 1.2V/3.3V Fixed Output Voltages
1A Output Current
20μA (TYP) Quiescent Current
Up to 95% Efficiency
Selectable PFM Light Load Operation
Fast Load Transient Response
100% Duty Cycle
Logic Enable Input
Soft-Start
Input Under-Voltage Lockout
Over-Current Protection
Thermal Shutdown
Active Output Discharge
Available in a Green WLCSP-0.9×1.2-6B Package
Optical Modules
Cellular Phones
Tablets
Wireless Data Cards
Embedded Power Supply
Wearables
IoT
Security and Surveillance
