China/中文Other/EnglishEurope/English
SGM4073
Reset Timer with Integrated Load Switch
Reset Timer with Integrated Load Switch
GENERAL DESCRIPTION

The SGM4073 can be used as reset timer as well as load management switch. The device is very suitable for highly integrated applications.

When the mobile device is turned off, press the start key to keep the PMIC at a logic low level for 1.9s to turn on the PMIC.

Since the Quiescent Current of the SGM4073 is as low as 1μA (TYP), it supports direct interface with low-voltage chipsets and can maintain low power consumption.

When the device is used as a reset timer, disconnecting the PMIC from the battery power for 468ms will produce a fixed delay time of 7.7s. The delay time can be adjusted by an external resistor connected between the DELAY_ADJ pin and ground.

The SGM4073 also can be used as a load management switch. It can disconnect loads with high shutdown current and high load capacitance (< 200μF) powered by a supply voltage lower than 6V. The SGM4073 provides a 20mΩ on-resistance when VBAT is 3.6V.

The SGM4073 is available in a Green WLCSP-1.31×1.62-12B package. It operates over an ambient temperature range of -40 to +85.

PIN CONFIGURATIONS

Snap1.png

FEATURES
  • Supply Voltage Range: 1.5V to 5.5V

  • Factory-Set parameters:

  • Reset Delay Time: 7.7s

  • Reset Pulse: 468ms

  • Turn-On Time: 1.9s

  • Turn-Off Delay: 7.7s

  • Adjustable Reset Delay Time

  • 6A Maximum Continuous Current

  • 20mΩ (TYP) On-Resistance at VBAT = 3.6V

  • Output Capacitor Discharge during Reset Period

  • Slew Rate or Inrush Control with tR: 3ms (TYP)

  • Enable Zero-Second Test

  • Available in a Green WLCSP-1.31×1.62-12B Package

APPLICATIONS

Computers

Battery

Portable Equipment

Storage Equipment

ORDERING INFORMATION
Part Number Status Package Pins Pb-Free Temp Range
SGM4073YG/TR Production WLCSP-1.31×1.62-12B 12 Y -40℃ to +85℃ Samples
规格书暂未发布,请联系sales_china@sg-micro.com申请规格书。
* 请使用公司后缀邮箱申请。在邮件中写明您的公司邮箱、联系电话、公司名称、职位/头衔、您申请规格书的准确料号、芯片应用项目、芯片应用产品可以帮助您加快获取速度。