China/中文Other/EnglishEurope/English
SGM2567A
5.5V, 4A, 15mΩ RON Load Switch with Reverse Current Protection
5.5V, 4A, 15mΩ RON Load Switch with Reverse Current Protection
GENERAL DESCRIPTION

The SGM2567A is a single load switch with reverse current protection function. The device can operate from 2.2V to 5.5V single supply and has the ability to drive up to 4A continuous current.

The device contains a 15mΩ low RON N-MOSFET controlled by the ON pin. When the power supply is turned on for the first time, a smart pull-down resistor is used to float the ON pin until the system is stable. Once the ON pin reaches a high voltage (> VIH), the pull-down resistor is disconnected, then the standby current is very low and power loss can be reduced. The small package and low RON make the device very suitable for space limited, battery powered applications.

The device supports a wide input voltage range, which is suitable for many different voltage rails. The rise time is used to avoid inrush current. The SGM2567A offers the quick output discharge function in disable status.

The SGM2567A is available in a Green WLCSP- 1.45×0.95-6B package.

PIN CONFIGURATIONS

1593658984999743.png

FEATURES
  • Input Voltage Range: 2.2V to 5.5V

  • Maximum Continuous Current: 4A

  • Low On-Resistance

    RON = 15mΩ at VIN = 5V

    RON = 15mΩ at VIN = 3.3V

  • Low Shutdown Current: 0.31μA (TYP)

  • Reverse Current Protection When Disabled

  • Low Threshold 1.8V GPIO Control Input

  • Bidirectional Power Supply for Power Zone Application

  • Quick Output Discharge

  • Internal Fixed Slew Rate to Avoid Inrush Current

  • Over-Temperature Protection

  • Available in a Green WLCSP-1.45×0.95-6B Package

APPLICATIONS

Smartphone

Notebook and Tablet Computers

Solid State Drive (SSD)

Set-Top Boxes and Residential Gateways

Portable and Handheld Devices

ORDERING INFORMATION
Part Number Status Package Pins Pb-Free Temp Range
SGM2567AXG/TR Production WLCSP-1.45×0.95-6B 6 Y -40℃ to +125℃ Samples
规格书暂未发布,请联系sales_china@sg-micro.com申请规格书。
* 请使用公司后缀邮箱申请。在邮件中写明您的公司邮箱、联系电话、公司名称、职位/头衔、您申请规格书的准确料号、芯片应用项目、芯片应用产品可以帮助您加快获取速度。