High-Power Stereo Class-D Audio Power Amplifier with Adjustable Power Limit and Automatic Level Control
High-Power Stereo Class-D Audio Power Amplifier with Adjustable Power Limit and Automatic Level Control

The SGM4703 is a high-power, high efficiency, stereo Class-D audio power amplifier with adjustable power limit (APL) and automatic level control (ALC). It operates with a wide range of supply voltages from 5V to 26V. With 24V supply voltage, it can deliver 2 × 40W peak output power for a pair of 8Ω speakers with 10% THD+N.

The high efficiency of SGM4703 extends battery life in playing music and allows it to deliver an output power of 2 × 20W without the need for a bulky heat sink on a two-layer system board. Its high PSRR and low EMI emission reduce system design and manufacturing complexities, as well as lower system cost.

The SGM4703 features APL and ALC. The APL limits peak audio outputs to a user-defined value to protect audio speakers from excessive power dissipation or over-load. The APL and ALC adjust the voltage gain of the audio amplifiers in response to over-limit audio inputs, eliminating output clipping distortion while maintaining a maximally allowed dynamic range of audio outputs. The limiting voltage of APL and ALC can be either a user-defined value or the supply voltage.

The SGM4703 can be configured into driving either a pair of speakers in Bridge-Tied-Load (BTL) configuration for stereo applications or a single speaker in Parallel BTL (PBTL) configuration for mono applications.

The SGM4703 features two PWM modulation schemes for Class-D audio amplifiers: Dual-Side-Modulation (DSM) and Single-Side-Modulation (SSM).

In SGM4703, comprehensive protection modes against various operating faults ensure its safe and reliable operation.



  • Wide Range of Supply Voltages from 5V to 26V

  • Adjustable Power Limit to Safeguard Audio Speakers

  • Automatic Level Control to Eliminate Output Clipping

  • 4 Selectable Gain Settings: 20/26/30/34dB

  • 3 Selectable ALC Dynamic Characteristics

  • 2 Selectable PWM Frequencies with Optional Spread-Spectrum: 360kHz and 500kHz

  • 2 Selectable Modulation Schemes: SSM and DSM

  • Optional PBTL Configuration for Mono Applications

  • Peak Output Power in Non-ALC

    2 × 40W (VDD = 24V, 8Ω + 33μH, BTL, THD+N = 10%)

    2 × 32W (VDD = 24V, 8Ω + 33μH, BTL, THD+N = 1%)

    80W (VDD = 24V, 4Ω + 33μH, PBTL, THD+N = 10%)

    64W (VDD = 24V, 4Ω + 33μH, PBTL, THD+N = 1%)

  • ALC Output Power (THD+N < 0.5%) in ALC

    2 × 30W (VDD = 24V, 8Ω + 33μH, BTL)

    2 × 21W (VDD = 15V, 4Ω + 33μH, BTL)

    60W (VDD = 24V, 4Ω + 33μH, PBTL)

  • Wide ALC Dynamic Range: 12dB (VDD = 12V)

  • Low THD+N: 0.02% (VDD = 12V, 4Ω + 33μH, PO = 10W/Ch)

  • High PSRR: 80dB at 1kHz with SSM

  • Protection Modes against Various Operating Faults Including Under-Voltage, Over-Voltage, Over-Current, Over-Temperature, and DC-Detect

  • Available in a Green TSSOP-28 (Exposed Pad) Package


Bluetooth/Wireless Speakers

Consumer Audio Speakers


Part Number Status Package Pins Pb-Free Temp Range
SGM4703YPTS28G/TR Production TSSOP-28 (Exposed Pad) 28 Y -40℃ to +85℃ Samples
* 请使用公司后缀邮箱申请。在邮件中写明您的公司邮箱、联系电话、公司名称、职位/头衔、您申请规格书的准确料号、芯片应用项目、芯片应用产品可以帮助您加快获取速度。