Dual Load Detector with 300nA Operating Current
Dual Load Detector with 300nA Operating Current

The SGM790A, SGM790B and SGM790C are low current, dual load sensing devices that can detect connection or removal of the loads on a supply bus. By using short pulse injections into the input capacitance and measuring the voltage change, load existence is periodically checked.

The SGM790A and SGM790C provide wake-up output pins, denoted by WKP and nWKP respectively. The logic levels of the SGM790C are completely the opposite of the SGM790A. When a load attachment or detachment is sensed, a pulse (1.3s, TYP) is generated on WKP (nWKP) pin to report the status change or to awaken the host. The bidirectional WKP (nWKP) pin is also used as a selection input pin to choose either SNS1 or SNS2 channel. The detection status of SNSx channel is reported on the FLG output pin during the 1.3s window. In the SGM790B, the most recent detection status of SNSx channel is reported on the corresponding FLGx channel output.

These devices are available in a Green UTDFN-1.2×1.2-6L package, and can operate in the ambient temperature range of -40 to +85.



  • 2.5V to 5.5V Operating Voltage Range

  • Very Low Operating Current: 300nA (TYP)

  • Two Independent Detection Channels

  • 1.3s Wake-Up Output Signal

  • 160ms Detection Period

  • Available in a Green UTDFN-1.2×1.2-6L Package


Power Bank

Powered Storage Box

Low Standby Power Cord Supply

Part Number Status Package Pins Pb-Free Temp Range
SGM790CYUDX6G/TR Production UTDFN-1.2×1.2-6L 6 Y -40℃ to +85℃ Samples
* 请使用公司后缀邮箱申请。在邮件中写明您的公司邮箱、联系电话、公司名称、职位/头衔、您申请规格书的准确料号、芯片应用项目、芯片应用产品可以帮助您加快获取速度。